[eaglesan13]

There is insulation inside the foot well area, behind the kick panel. But my car only had the insulation on one side. So I bought some bulk insulation for three bucks at Lowes and used the original piece as a pattern, then cut new ones.

[eaglesan13]

My car originally had sandlewood interior but sometime before I got it someone had rattle canned the interior to a saddle color. And it was a pretty poor job, they just painted everything and there was overspray everywhere. I cleaned up the kick panels and repainted them using the SEM paint I described earlier.

[eaglesan13]

This morning I hung the drivers side fender and fender well. I then set the front bumper in place. All the front sheet metal will be final-adjusted by the body man/painter. It's nice to get the sheet metal onto the car so I have some room in the garage. FYI, the reason those towels are always hanging on the passenger door is because my wife parks her car in the garage next to the Formula and I don't want any "accidents" when she opens her door. Cheap insurance

[165th]

Thanks again for the great progress pics. Man, that color keeps looking better and better as the parts are hung on the car. The nose is incredible. Good luck with the final body fitment.