#1  
Old 10-27-2010, 12:35 AM
Roadbuster's Avatar
Roadbuster Roadbuster is offline
Member
 
Join Date: Apr 2007
Location: SoCal
Posts: 31
Default

Quote:
Originally Posted by marauder View Post
Strongly consider

Rear 285/40x17 on 17x10x5.5
Front 245/45x17 on 17x8x4.5

no rubbing issues at all and they fill up the wheel well nicely

actually 255/45x17 should fit in the front as well.
Yes, 255s will fit on the front for width. A 255/45R17 is a 26 inch tall tire and this could get a little tight.

RFCOLEMAN: a 245/45R17 on a 17x8 with 4.625 bs will fit in the rear, but I agree with marauder. Bigger rears will look better.

Quote:
Originally Posted by RFCOLEMAN View Post
The driver side front bottom edge of the fender rubbed, cut the edge of the tire. For some reason, I can measure 3/8 " differance from driver side to passenger side front to back.
Thanks,
Bob C.
That is where mine rubbed with the 17x7 with 3.75 bs front.
Measure the back spacing on your wheels to make sure they are the same and check that you have the same front rotors left to right.

Mine with 245/45R17 front and rear on 17x7 and 17x8



I realize my car is not the norm here: I changed to 255/35R18 on 18x9 on the front and 305/35R18 on 18x11 on the rears. Toyo R888 rubber.

Old and new rears:


With new wheels and tires:

__________________
1968 GTO with SC&C Suspension
  #2  
Old 10-28-2010, 09:03 PM
marauder's Avatar
marauder marauder is offline
Ultimate Warrior
 
Join Date: Dec 2004
Location: St Petersburg, FL
Posts: 1,455
Default

Mine could use a little lowering and in hindsight would of put 18x10x5.5s on the rear....
Attached Thumbnails
Click image for larger version

Name:	GTO gas station.jpg
Views:	118
Size:	69.4 KB
ID:	222654  

__________________
Curt
'69 GTO Ragtop, 455, RA, KRE SD Perf ported heads and "old Faithful" cam, Sean Murphy Q-Jet, Tremec 5spd, Moser Trutrac 3:73, Hotchkiss, Speedtech, Wilwood
'64 Lemans Convertible, Tremec TKO600
  #3  
Old 10-28-2010, 11:25 PM
triathlonx13's Avatar
triathlonx13 triathlonx13 is offline
Ultimate Warrior
 
Join Date: Aug 2007
Location: NY
Posts: 2,300
Default

Quote:
Originally Posted by marauder View Post
Mine could use a little lowering and in hindsight would of put 18x10x5.5s on the rear....
Freak'n sweet ride dude !!!! Post more picture of that beast !


.

__________________
  #4  
Old 10-28-2010, 11:34 PM
triathlonx13's Avatar
triathlonx13 triathlonx13 is offline
Ultimate Warrior
 
Join Date: Aug 2007
Location: NY
Posts: 2,300
Default

ok - Here's those 16" ,,, :-)


.
Attached Thumbnails
Click image for larger version

Name:	68 GTO - D.JPG
Views:	74
Size:	91.5 KB
ID:	222677   Click image for larger version

Name:	68 GTO - A.JPG
Views:	97
Size:	86.0 KB
ID:	222675   Click image for larger version

Name:	68 GTO - E.JPG
Views:	84
Size:	93.6 KB
ID:	222676  

  #5  
Old 05-29-2011, 02:09 PM
Greg Reid's Avatar
Greg Reid Greg Reid is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Palmetto, GA. USA
Posts: 16,177
Default

Quote:
Originally Posted by triathlonx13 View Post
ok - Here's those 16" ,,, :-)


.
I'm generally a traditionalist when it comes to wheels and tires..no bigger than 15s.. but man...that car looks good with those 16s.
Ok, so 16s are ok with me now. lol

__________________
Greg Reid
Palmetto, Georgia

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:22 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017