[njsteve]

It should work, though the corrugated aluminum foil tube that connects the passenger side air cleaner thermactor to the choke stove on the bottom of the air cleaner snorkle will probaby need a little kink in it to clear that high portion of your bracket.

[72TAMAN]

Originally Posted by njsteve

It should work, though the corrugated aluminum foil tube that connects the passenger side air cleaner thermactor to the choke stove on the bottom of the air cleaner snorkle will probaby need a little kink in it to clear that high portion of your bracket.

I would love to get all the proper brackets and everything else for the Trans Am but I don't even have the matching # motor,it's not even a 455 that I have it's only a 400 so I don't think it really matters for now . Maybe some day I'll track down the matching # motor. I talked to one ex owner and he thought it was the matching # motor that was in the car when he had it, but it wasn't because all the work he put in the motor matches what was done on the 400 motor I have.

[72TAMAN]

Summer of 2010

Restored the harmonic balancer

[72TAMAN]

Summer of 2010

Clean up motor mounts and painted them

[72TAMAN]

Pick up a 72 base Firebird three weeks ago for $550. Original color of Firebird is code 65 (sundance orange) and trim code is 212 = 121 ivory , nice combo. The floors pans and the trunk are done but have the new repo pans and new middle section for trunk for it also as a new 3/4 quarter panel installed on the driver side and the pass side quarter is cut off the car but have the panel also have 2 new frame rails (3/4 ones). No seats or carpet and no motor or trans but the guy as the motor and trans and are matching # to the Firebird . It also came with a Formula hood and lots of chrome parts like front valence, hood hinges, heather box, booster, combination valve ,trunk and rear window filler panel and all the interior pillars moldings. I guess well worth the $550