[SergeF]

I am running 2" headman and they sux, What elese do we have there? What are you guys using for 2" primary. Thanks

[harry k]

Sergeee
Indian Adventures use to carry 2" with 3.5" and it was slip fit pipes ,when they were around (i don't know what happen to them nowadays.. anyone?) i believe it was made by Mad Dog .

[formulabird428]

Kinda OT -- but

I used Hedman headers 2"-d-port and they didn't even fit (at all). I also used hedman 1.75(?) and they sucked as well.

Hooker SC fit much much better (1.75").

[Jeff Kinsler]

i had 2" mad dog headers for my e-heads and they fit everywhere but hit the side of the IAII block and my oil pan. if its a stock block than you will be fine with them. if not have custom headers made..

[Ron H]

I have no issues with the Hedman 2" headers fitting.

The only place I found troubles was on the drivers side at the stock steering box. But they still fit.

I now have a vega style steering box and there is plenty of room.

[Probird]

Mad Dog headers fit really well. MUCH better than the Hedman's ever did.

[estep455]

Originally Posted by Probird

Mad Dog headers fit really well. MUCH better than the Hedman's ever did.

mad dog still around?

[Probird]

Yea, they're still around. Here's the website: http://maddogheaders.net/index.html

[Gman 6900]

I have 2" X 3 1/2" Nunzi in my 69 Firebird with E-heads. Fit great but with A/C the back bolts are a problem. Had to massage the driver side because of the motor mount. I have used these headers on a 455 and IAII.

[p4msi1]

I have headman headers on my 69 firebird but it wasn't easy. I cut them mostly all up and reconfigured to tubing on all but about 3 pipes. The steering box was an issue and some tapping with a hammer fixed that. No more looping around the frame. I also welded in the flowmaster ball & socket flanges, no gaskets there. They should advertize these headers to fit any engine because they sure don't fit a pontiac, (some cutting, welding, beating and banging required for proper fit). I did all that and did not gain 1 hp over the 1 3/4" headers that fit really well. So to all,... up to about 600,(maybe even more) hp keep your 1 3/4" headers on and spend your time and money somewhere else.

Steve

[Donovan]

Originally Posted by p4msi1

I did all that and did not gain 1 hp over the 1 3/4" headers that fit really well. So to all,... up to about 600,(maybe even more) hp keep your 1 3/4" headers on and spend your time and money somewhere else.

Steve

Solid info Steve thanks!

I guess it all comes down to visual appeal for some- truth be told...

I'll take your advice thanks!