| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
07-21-2011, 12:37 AM
|
||||
|
||||
No problem Kell..I should also mention that I have enough clearance on the inside of the rear tires to fit a 10" wheel with 6" backspace.
|
|
#2
08-23-2011, 09:09 PM
|
||||
|
||||
|
68 GTO Vert - new wheels/tires
Repro 14 x 6 Hurst wheels with 225/70/14 BFG Radial TA's.
__________________
R68GTO 1969 Camaro COPO 427 "RAT'S NEST" |
|
#3
10-02-2011, 12:32 AM
|
||||
|
||||
|
T70R's
Here is my '65 Tempest project, with the ultimate set of wheels and tires.
     The wheels are American Racing T70R's with billet 200S caps. They are 15x7 with a 4 inch backspace in the front, the rear wheels were 15x8, they have been widened in the backsides by Weldcraft Wheels to 15x9 and now have a 5 inch backspacing and zero offset. The tires are BFG T/A Radials, 215-65-15 in the front, and 275-60-15 in the rear. The car sits a couple of inches above stock, I used '66 GTO springs CS5244 front and CS5235 rear. The original rear end is in the car. There are no clearance problems. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
