[mechanickeith]

We need lots of detailed pictures before a number can be decided on. Post up a bunch of pics's to include the lower fender/rocker areas. Paint, interior, top in up position, etc, etc. Also pics of the frame areas around the rear suspension arm mounting areas.

[cobrae]

Bit wet out but I took a couple pics this morning. The car does need paint. You can see where the doors were not aligned and it chipped the paint on the edges and such.

Looks like the rockers have had some work and might have a lil bondo in them not sure. I do know the floor has been patched. Hard to get an older car up here without some patches in the floor.

When it drys out outside I will try and lift it up for a couple pics underneath. We looked it over underneath when we got it on my trailer and it looked pretty good. There is some surface rust here and there but nothing bad or scary.

[cobrae]

Couple pics from under. The floors have been patched and it looks like there's been some work done under it. You can see some bondo in the rocker like I figured. Its not perfect but its actually very solid. The guy didn't to amazing work but better than I could do probably. Never touched a welder in my life lol.

I did take a video of it running will take a lil while to upload my upload speed is horrible.

[cobrae]

http://www.youtube.com/watch?v=nPfoixnc58U

[GaryK]

Originally Posted by cobrae

http://www.youtube.com/watch?v=nPfoixnc58U

I like the diamond cut interior pattern on the seats and door panels.

[cobrae]

Still waiting for the brake shoes. Hoping they are gonna work. I do need to get the hose for the front drivers side brake I think it is. And the ball joints ofcourse.

[cobrae]

Still working on getting that hesitation out. Once it warms up it goes away pretty much. Tryin to get it going before I have to actually sell it. If I can then theres no way its going anywhere.