[RAIV-Z]

Originally Posted by Region Warrior

Who's make'n the Super 400 again?

Tim Hansberry http://www.hansberryinc.com/index.html
Route 724 PO Box 391 Parkerford, PA 19457 1-610-495-5344

I'd expect we'll have Steve's hood within 2 weeks.
Bolt-On and Pin-On are available, both come with the raised cowel panel.

[mikes2nd]

I called Hansberry about a bolt on trunk and a full pro front clip for a 70 gto...

Second day they answered the phone... been two days with no response if they make the parts...

guess ill try vfn or glasstek

[RAIV-Z]

Latest update: Bolt-on Super400 hood finished yesterday.

[Region Warrior]

Thanks RAIV-Z.
Been on list since Paul Spotts sold'm.
Time to save up again...

[RAIV-Z]

This one is for Steve's 67 firebird, we'll trial fit it and take some pictures with it on my 69

[RAIV-Z]

Bolt-On Super 400 hood arrived today.

[RAIV-Z]

Originally Posted by Region Warrior

Who's make'n the Super 400 again?

Tim Hansberry http://www.hansberryinc.com/index.html
Route 724 PO Box 391 Parkerford, PA 19457 1-610-495-5344

[rohrt]

Just read through the build. Very Cool!

I will be curious to see how well you like the sound of the exhaust and if the super 400 hood fits. You have a very tall set up.

[JoePapa]

How's the quality and fit of the new Super400 hood?

[67'7F6'Bird]

Originally Posted by rohrt

Just read through the build. Very Cool!

I will be curious to see how well you like the sound of the exhaust and if the super 400 hood fits. You have a very tall set up.

Thanks!!! The motor is running and the exhaust sounds Great. We may need to remove the 1 inch spacer for the Super 400 Hood to fit.

We haven't put the nose on the car yet, but will shortly and then be able to give some feedback on this Hood.

Steve

[67'7F6'Bird]

Ed and I decided to put the nose on the car today to make sure its still a Firebird.

[67'7F6'Bird]

Here is the complete car once again. YEAH!!!!! Also, last picture is our rear hanger installed on the exhaust.

[ponjohn]

This thread is FANTASTIC!!

I have a few questions.

As you remove and reinstall panels to test fit how do you know it's going back in the same exact spot?

How did you determine where and how many plug weld holes to use?

Does the rain gutter stay on the car even when the roof and quarter is removed?

Keep us updated.

John

[67'7F6'Bird]

Thank ponjohn, Answers below.

Originally Posted by ponjohn

This thread is FANTASTIC!!

I have a few questions.

As you remove and reinstall panels to test fit how do you know it's going back in the same exact spot? We used small self tapping screws in multiple locations.

How did you determine where and how many plug weld holes to use? Depending on the size of the plug weld needed we spaced them accordingly, about 1 to 2.5 inches.

Does the rain gutter stay on the car even when the roof and quarter is removed? Yes, The gutters remained attached on this build.

Keep us updated.

John

[67'7F6'Bird]

A few updates...

We installed the Transmission Cooler with Fan, the Electric Fan for the Radiator, Fan Shroud and the Derale Fan Controller. The real tail-Pipe Hangers we welded on too.

Steve

[frankyboy455]

Originally Posted by 67'7F6'Bird

A few updates...

The real tail-Pipe Hangers we welded on too.

Steve

didn't you want to bolt them on like the factory did ?

[67'7F6'Bird]

Originally Posted by frankyboy455

didn't you want to bolt them on like the factory did ?

I needed the welding practice in tight spots.

It looks cleaner this way.

Originality can be Improved.

Those little factory bolts wouldn't hold up this 3" tailpipe. HAHAHA

[67'7F6'Bird]

We put the "Super 400 Hood" on the car. The fit is OK, it does need some time for overall clean-up from the mold process. the middle sides of the hood which run along the fender seem about a 1/4" high. I may need Dzus fasteners to run along side the hood for proper fitment to pull it down. Pictures to follow.

[67'7F6'Bird]

I received the "Universal Spinners" 2" Drop Base and Flat Lid with middle recess for the Air Cleaner Bolt. This stuff is Very Nice and I recommend them to anyone who need more hood clearance.

http://www.racingjunk.com/Drag-Racin...-drop-16-.html


Once installed with my Super 400 Hood and 3.5" K&N Air Cleaner the hood still doesn't close all the way and it needs about 1/2" More clearance minimum. Instead of cutting the Victor Intake down I am going to order the Northwind Intake which is 1.25" shorter than the Victor with comparable flow.

http://www.krepower.com/Pontiac%20Intakes.htm


Steve

[67'7F6'Bird]

4500 Northwind RAIV Ports Intake being Delivered today.