[RicksGTO]

Originally Posted by 71formula455

I've got my leafs all painted and ready for reassembly . . .can anyone provide some input on how best to install these clips?

Do i need a hydraulic press?

I used a large C-clamp to hold the sides tight around the spring stack and then a small hammer to get the bends on the top and tabs tight. Also used a C-clamp on the leaf stack right next to the clips to keep the leafs fairly tight.

[71formula455]

Originally Posted by RicksGTO

I used a large C-clamp to hold the sides tight around the spring stack and then a small hammer to get the bends on the top and tabs tight. Also used a C-clamp on the leaf stack right next to the clips to keep the leafs fairly tight.

Well then, out come the C-clamps. . thanks for the input Rick.