| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
11-23-2012, 04:10 PM
|
||||
|
||||
I may actually have an old dented pan with the baffle. I will go check. Thanks for giving me the heads up. Sometimes you're so busy doing something, you just don't notice the obvious things that are missing!
|
|
#2
11-23-2012, 04:29 PM
|
||||
|
||||
|
I just checked out the garage. The dented old pan I have was the original pan from my 72 T/A. No baffle.
Didn't the later model pan also have a different rear seal? Anyone got a photo of the pan baffle (next to a ruler would be perfect)...or better yet, have an extra, loose pan baffle? The original pans usually have the oil drain plug in a different spot than the later/aftermarket ones. So I am trying to look original on the outside, at least. Last edited by njsteve; 11-23-2012 at 05:20 PM. |
|
#3
11-23-2012, 05:52 PM
|
||||
|
||||
|
Here's a photo of a baffled pan but it is at an angle. If someone could post a photo from directly overhead and get me some measurements, I could create one at the votech metalshop next tuesday night.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
