[cuz68]

Gregg, It is very hard to get to your heater motor. You must remove your iner fender or take your fender off to replace it. Good luck Randy.

[zephyrracer]

Originally Posted by cuz68

Gregg, It is very hard to get to your heater motor. You must remove your iner fender or take your fender off to replace it. Good luck Randy.

Thanks hopefully it won't come to that, looks like the wire is off and wedged between the fire wall and wheel well not connected to the heater motor, I'm hoping the motor will work when I reconnect the wire if not off comes the wheel well. I have heard that the stock heater motors don't blow very hard is there a better motor to replace if need be.

Thanks Gregg