| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
I Believe more cam will get you there.
I got my camshaft from Scott Brown and that makes all the difference In my application, My heads flow less then yours do and I think with A cam like mine you would make a lot more power. As for as the n20 Try more you won't know intill you do, It's not like it won't make more It's how much more (will) it make with more. The only thing about running more camshaft is you'll need springs to handle the cam also. I do believe with a better camshaft you will make quite a bit more power. I am at more compression 12:1 and still pump gas. Hope this helps. My LSA is at 113. GT. |
|
#2
|
||||
|
||||
|
Quote:
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#3
|
||||
|
||||
|
Quote:
GT. |
|
#4
|
||||
|
||||
|
Quote:
Do you have any time slips or dyno numbers? Could you share your cam spec's? If not I understand..
__________________
My Half AN Injun..... |
|
#5
|
||||
|
||||
|
Quote:
I'll get the specs for ya in a day or so. GT. |
|
#6
|
||||
|
||||
|
Cool.
Thank You...
__________________
My Half AN Injun..... |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|