| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
I installed a Petronix Flamethrower piece of cake make sure you get the small sub harness that plugs into the cap you will need to run 1 switched 12v source to the distributor the other side of the plug is for the tach that's it I upgraded my wires at the same time this thing will knock your socks off as far as spark goes very reliable and fairly inexpensive got mine at a show all for around 200.00 .Can send you a pic if you need one.
|
|
#2
|
|||
|
|||
|
Arbys: let me see if I can clarify. My understanding is that there are 2 types of distributors- the original "points" style, and the "electronic" style. Both require the basic "core" of the distributor assembly (shaft, weights, springs, rotor and cap).
My confusion is this: Part 1- I can go on ebay and buy a complete "off brand" electronic style distributor as cheap as $45. I can also find them from $150 to $450.... Question 1: What is the difference in these units besides name brands? Part 2- If I use the current distributor I have, I understand that I should swap the weights and springs, I need to buy a cap and rotor and adding the Pertronix kit puts my outlay at $120. Question 2: What is the benefit of upgrading the current unit at $120 vs. buying the cheap ebay unit at $45? I don't want to cheap out but I want to know why I'm spending and if it is necessary to the performance and reliability of the vehicle. |
|
#3
|
||||
|
||||
|
I don't know what the eBay unit is. If your module fails will you be able to replace it next year? Pertronics has been around for a long time and is trusted by many. Are you getting all the parts that you need with the eBay unit? I wouldn't take a chance on the eBay unit but the decision is yours.
Do you have a link for the eBay unit? |
| The Following User Says Thank You to arbys For This Useful Post: | ||
|
#4
|
|||
|
|||
|
I don't usually use ebay but if the parts are significantly cheaper I might be inclined to use one... If I can buy a distributor for $45, I can buy almost 3 of them for the price of upgrading my stock one. That being said, if the stock one is destined to last significantly longer with no issues I'd probably upgrade.
Here's some links: http://www.ebay.com/itm/HEI-Distribu...5efbc9&vxp=mtr http://www.ebay.com/itm/HEI-IGNITION...0a6d0c&vxp=mtr http://www.ebay.com/itm/MSD-8528-Dis...4eb613&vxp=mtr http://www.ebay.com/itm/Mallory-7758...0beda7&vxp=mtr |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|