| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
Gauges look really good Glenn. Just noticed on your Volts gauge, it almost looks like a alignment mark the needle is pointing to at rest. I just wonder if that what that is? Not really critical information, just an observation.
__________________
1973 Formula 400 4 spd 04C build date Norwood assembly plant. |
|
#2
|
|||
|
|||
|
possibly when they are assembled, nice observation!!...I know some have to send there gauges out for restoration..but these are untouched..the entire dash is amazing..original am/fm stereo too!!
|
|
#3
|
|||
|
|||
|
|
|
#4
|
|||
|
|||
|
LUCKILY MY SEATBELTS ARE FINE AND COMPLETE..THEY ARE STANDARD AND THE FIRST DESIGN..I WILL BE REPLACING THE PLASTIC BUCKLE WITH NEW..UPPERS NEED NEW ELASTIC
|
|
#5
|
|||
|
|||
|
I AM MOCKING UP THE REAR INTERIOR...PREPARING FOR CARPET INSTALLATION..I KNOW IT SEEMS BACKWARDS BUT I KNOW WHAT I AM DOING...MY REAR 1/4 TRIM SEAT PANELS ARE REPOPS..I HIGHLY RECOMMEND THEM....NORMALLY THE REAR 1/4 WHEEL WELL HUMPS GOT TAR PAPER LIKE SOUND DEADNER..MINE WERE SHOT...AMES SELLS A JUTE PIECE FOR THE HUMP...I DECIDED TO SPAY ADHESIVE THE JUTE TO THE BACK OF MY TRIM 1/4 PANELS...THEN FROM THE PARTS PLACE I INSTALLED A REAR SEAT JUTE DIVIDER FOR SOUND DEADNING...THEN I INSTALLED A CARDBOARD DIVIDER...SURPRISINGLY EVERYTHING FIT PERFECT READY FOR THE BACK SEAT...
|
|
#6
|
|||
|
|||
|
|
|
#7
|
|||
|
|||
|
in 1972 FIREBIRDS interiors..standard & deluxe received a standard rear package shelf tray...only 1970 -71 ESPRIT & Deluxe interiors received the mesh...its a shame GM got cheap..the U.S. government did not help with emissions and safety laws..5mph bumper, gee thanks...anyway, I always save hardware...my rear speaker will be the best!!!
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|