| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
Thanks for replies...
My SR open is 980'ish....guess that answers my question?? I gather the lobe profiles will be different so maybe pressures will be different too as related to lift and ramp speeds..?? Anyone using Johnson lifers?? Just wondering.. P-Dude ...ya out there??
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#2
|
||||
|
||||
|
When I ran my 260'[email protected] Hyd roller I ran 150 seat with 405 open and at Virginia on spray, 7000 rpm thru the traps it ran perfect.
I set Butchers up the same way. I use the Beehive springs/titanium retainers as you can use less pressure with better valve control. Well Worth the extra money. Easier on parts too. ************************************************** ***************** |
|
#3
|
||||
|
||||
|
Seriously? The heavy valvetrain in my hemi only needed about 650 lb. open to run 9,000 RPM.
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) ... or has a Pontiac born the same year as Jim Wangers? (1926}
|
|
#4
|
||||
|
||||
|
Thanks Dude...
Yes Jack. Seriously....370 seat
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|