#1  
Old 06-10-2014, 06:22 PM
65gto69's Avatar
65gto69 65gto69 is offline
Ultimate Warrior
 
Join Date: Jan 2002
Location: NE, PA
Posts: 1,729
Default

My wear pattern is even across the tires on both sides and I have been using this setup for over 7 years now and I bought the tires and rims used which had several street miles on them and some track time before I got them.

Just saying

mark

__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.

  #2  
Old 06-10-2014, 07:16 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,929
Default

Example from old Firestone sales material, Firehawk INDY 500 tires

Size P275/60-R15

Approved rim width 7.5 - 9.5 inches
Measuring rim width 8.0 inches

SW 11.0 inches on 8" rim
TW 9.0 inches on 8" rim



.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
Best time 5.13 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE
  #3  
Old 06-10-2014, 08:22 PM
NotaT/A NotaT/A is offline
Member
 
Join Date: May 2009
Posts: 38
Default

It seems that GM is ok with a 275/60-15 on a 7" wheel. They have done it on several truck applications.

See attached tire placard
Attached Thumbnails
Click image for larger version

Name:	Tire Placard_ c.jpg
Views:	141
Size:	83.0 KB
ID:	366456  

  #4  
Old 06-10-2014, 08:31 PM
b-man's Avatar
b-man b-man is offline
Moderator
 
Join Date: Sep 2002
Location: Sunny So Cal
Posts: 17,617
Default

Quote:
Originally Posted by NotaT/A View Post
It seems that GM is ok with a 275/60-15 on a 7" wheel. They have done it on several truck applications.

See attached tire placard
How 'bout that for the doubters.

  #5  
Old 06-11-2014, 03:10 AM
Blued and Painted's Avatar
Blued and Painted Blued and Painted is offline
Ultimate Warrior
 
Join Date: Apr 2013
Location: Granby Colorado
Posts: 2,431
Default

Can someone get a measurement of the tread with of the 275 please.

__________________
Bull Nose Formula-461, 6x-4, Q-jet, HEI, TH400, 8.5 3.08, superslowjunk
  #6  
Old 06-11-2014, 03:19 PM
hada76's Avatar
hada76 hada76 is offline
Senior Member
 
Join Date: Jan 2008
Location: FLA
Posts: 156
Default

Quote:
Originally Posted by NotaT/A View Post
It seems that GM is ok with a 275/60-15 on a 7" wheel. They have done it on several truck applications.

See attached tire placard
I remember when these first came out, they had huge factory rubber



__________________
___________________________________________
the more im around people, the more i like my dogs
  #7  
Old 06-11-2014, 07:11 AM
The Champ's Avatar
The Champ The Champ is offline
Ultimate Warrior
 
Join Date: May 2002
Location: Rochester, MN
Posts: 2,590
Default

Quote:
Originally Posted by 65gto69 View Post
My wear pattern is even across the tires on both sides and I have been using this setup for over 7 years now and I bought the tires and rims used which had several street miles on them and some track time before I got them.

Just saying

mark
I would get those tires off my car now, even if they were new when you bought them. I won't run any tire more than 7 years old.

Old tires = a much greater risk of a catastrophic tire failure.

  #8  
Old 06-11-2014, 12:21 PM
Steve C. Steve C. is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Liberty Hill, Tx. (Austin)
Posts: 10,929
Default

"Can someone get a measurement of the tread with of the 275 please"

Size 275/60-15 used to more available and the actual tread width would vary slightly from the different companies.

Today BF Goodrich, Cooper and Hankook all suggest a 8.9" tread width measured on a 8" rim for their 275/60-15 tires. As mentioned previously Firestone when they carried that size suggested 9.0" tread width on a 8" rim.

Actual section width on the various tires will vary as well.


.

__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 )
Old information here:
http://www.hotrod.com/articles/0712p...tiac-trans-am/

Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine)
Best time 5.13 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension
https://www.youtube.com/watch?v=qDoJnIP3HgE
  #9  
Old 06-11-2014, 01:01 PM
Blued and Painted's Avatar
Blued and Painted Blued and Painted is offline
Ultimate Warrior
 
Join Date: Apr 2013
Location: Granby Colorado
Posts: 2,431
Default

This calculator said 10.8" wide. 28" tall. http://www.calcunation.com/calculato.../tire-size.php

Found this on the net. It must be right.
Note the * at the bottom of the page. Supports my point.
http://www.team3wheels.com/tech_specs_tire_chart.html

__________________
Bull Nose Formula-461, 6x-4, Q-jet, HEI, TH400, 8.5 3.08, superslowjunk

Last edited by Blued and Painted; 06-11-2014 at 01:19 PM.
  #10  
Old 06-11-2014, 01:08 PM
goatless's Avatar
goatless goatless is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: Newtown,CT
Posts: 4,592
Default

Yes, section width will vary based on rim width. No one is arguing otherwise. Doesn't mean the tread isn't making full contact.

__________________
1966 GTO
1969 Lemans Convertible- F.A.S.T. legal family cruiser. 12.59 on G70-14 Polyglas tires. 1.78 60'
1969 Bonneville Safari- cross country family cruiser. .
1979 Trans Am 400, 4-speed, 4 wheel disc.

View from the drivers seat racing down Atco Raceway- http://www.youtube.com/watch?v=GhYDMdOEC7A

Ride along in the other lane-http://www.youtube.com/watch?v=mIzgpLtF_uw
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:41 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017