[Burgess]

''Does anyone else have a set of heads that were worked on by Nunzi, or that can verify this was his head hammering goin' on? ''




I have an SR I167 7F6 head that went through Nunzi's sometime before the mid eighties. I bought this head in 1986, and it had been run for at least a few years before that. Attached is a photo of Nunzi's stamping that appears on both ends. There are no other stampings, but I think this head was probably new when sold by Nunzi.

[165th]

Originally Posted by Burgess

''Does anyone else have a set of heads that were worked on by Nunzi, or that can verify this was his head hammering goin' on? ''




I have an SR I167 7F6 head that went through Nunzi's sometime before the mid eighties. I bought this head in 1986, and it had been run for at least a few years before that. Attached is a photo of Nunzi's stamping that appears on both ends. There are no other stampings, but I think this head was probably new when sold by Nunzi.

That is cool to see the NUNZI hammered into your heads.

I have been able to confirm that JOB 331 is indeed a Nunzi reference. The source is none other than Nunzi's son Tony. He's a member here on the boards. Tony is currently digging through old files to see if he can find the folder on JOB 331. VERY COOL!