[ponchjoe]

Originally Posted by Danla

I need help with the vacuum hose configuration on the control panel. The connector is gone and all i have is a bunch (6) vacuum hoses hanging. 68 was a year by itself so i can't find a good diagram to locate which color hose goes on which port. I have the engine vacuum hose figured, but any combination i use with the others doesn't seem to work. Last time i tried. the heater doors open and close, but when i put the temp on hot, it blows cold air and vice versa. Any help or ideas?

I have mine apart. I will try to get out to the shop this weekend and see if they are color coded to help you out.

Joe