#1  
Old 01-18-2015, 02:49 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by 1050goat View Post
I've got BME 6.8 rods/ 4.211 Ross pistons = 1875.9 grams
Not being a smart azz but you did double real big end and the rod bearing weight as well?

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #2  
Old 01-18-2015, 04:48 PM
Hillard's Avatar
Hillard Hillard is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Springfield, Ohio
Posts: 1,329
Default

Quote:
Originally Posted by mike leech View Post
Not being a smart azz but you did double real big end and the rod bearing weight as well?
Yep. Don't have the numbers in front of me but the rods weighed 660 total (about 450 big end/210 small end), bearing about 50-ish, 444 for pistons, 145-ish on the pins, 7.5 support rails, 57 rings, 4.8 locks, added 5 for oil. Again, those numbers are off the top of my head but I know I'm really close on the numbers for the rods and pistons.

  #3  
Old 01-18-2015, 05:58 PM
rompn63's Avatar
rompn63 rompn63 is offline
Senior Member
 
Join Date: May 2002
Location: Burns Harbor, IN
Posts: 232
Default

Bob weight 1972.7 gms

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:23 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017