[mike leech]

He nor myself have EVER said my heads are the best. How could they be.


You have the best heads ever Karl. Take a deep breath











Now stop being a sissy and race me in your wonder machine that coasts to 8.51 at 3675lbs. get it to 3300 and trust me we will all notice how fast you went.......and what it weighed.

or Go for plan 2 and fish for a better lighter car and crew to save you.

[mike leech]

Originally Posted by KO

This thread isn't about me. Im praising John Bailey and my brother

The fxxk you are. This is ALL about you.

[KO]

OK, I will repeat my original statement:

I think I have a pretty good set (Edelbrock heads), I thought about having them copied.

[mike leech]

Originally Posted by KO

OK, I will repeat my original statement:

I think I have a pretty good set (Edelbrock heads), I thought about having them copied.

GREAT! Maybe one of your customers will want to race!



Ask Slawko how he feels about coping that port.

[Stan Weiss]

Why do not you both stop the BS and just load them up and go to Florida and race this weekend. I am sure David Holmberg will let everybody sleep in his garage.

Stan

[R 70 Judge]

Originally Posted by Stan Weiss

Why do not you both stop the BS and just load them up and go to Florida and race this weekend. I am sure David Holmberg will let everybody sleep in his garage.

Stan

What do your calculators say about all this?

[David Holmberg]

Originally Posted by Stan Weiss

Why do not you both stop the BS and just load them up and go to Florida and race this weekend. I am sure David Holmberg will let everybody sleep in his garage.

Stan

Why are you dragging me into this with the rolleyes? Damn Stan, I don't remember pissing on your computer.
Anyone's always welcome at my hole in the wall.

[Stan Weiss]

Originally Posted by R 70 Judge

What do your calculators say about all this?

G I G O

Stan

[Stan Weiss]

Originally Posted by David Holmberg

Why are you dragging me into this with the rolleyes? Damn Stan, I don't remember pissing on your computer.
Anyone's always welcome at my hole in the wall.

David,
I was saying to them chit or get off of the ......

The rolling eyes meant I was being "Sarcastic" about them sleeping in your garage. Maybe I should have put them in John W's garage.

Stan

[mike leech]

First only KO is on the POT. In more ways then one.

I'll be doing my best to be at nmca Bradenton. I'm waiting on a












Wait for it......Stan
















Coating on a valve and 7 pistons. Then dyno and in the car.

[mike leech]

Originally Posted by Stan Weiss

David,


The rolling eyes meant I was being "Sarcastic" about them sleeping in your garage. Maybe I should have put them in John W's garage.

Stan

Now that's funny.

[johnta1]

Maybe I should have put them in John W's garage.

I've got an acre of land.
But not as close to Bradenton as Dave.
(close to Orlando though)

Coating on a valve and 7 pistons. Then dyno and in the car.

You know I heard on here that that stuff is bullchit?

[mike leech]

Originally Posted by johnta1

I've got an acre of land.
But not as close to Bradenton as Dave.
(close to Orlando though)





You know I heard on here that that stuff is bullchit?

You can get lost on an acre.....? Wow.



And I told you in that tread that I have them in places. When we honed the block "settled" and had had to take .0017 to clean up. Coating skirts fixed piston clearance. And my junk azz heads still have steel seats so I must coat the ti intake valve.


Don't worry it's still not 50 hp or even 10 or 5. The ring seal will be worth something.

[KO]

Originally Posted by mike leech

GREAT! Maybe one of your customers will want to race!



Ask Slawko how he feels about coping that port.

Slawko would be the one doing the copying,dumbass

[KO]

Ok about the is race, weight is off the table now. We're at plus or minus 150#

[KO]

Originally Posted by mike leech

You can get lost on an acre.....? Wow.



And I told you in that tread that I have them in places. When we honed the block "settled" and had had to take .0017 to clean up. Coating skirts fixed piston clearance. And my junk azz heads still have steel seats so I must coat the ti intake valve.


Don't worry it's still not 50 hp or even 10 or 5. The ring seal will be worth something.

my heads were done right the first time, making them the best.

[mike leech]

Originally Posted by KO

Slawko would be the one doing the copying,dumbass

Then do smart azz.




And start your advertising campaign by being a punk and never showing up to race. And calling people out. And telling stories. And trying to find a different car for your motor.



That's never been done before

[KO]

Originally Posted by mike leech

Then do smart azz.




And start your advertising campaign by being a punk and never showing up to race. And calling people out. And telling stories. And trying to find a different car for your motor.



That's never been done before

BECAUSE YOU WONT BEND AN INCH!

my car weighs 3300# and is not certified to run quicker than 8.50 which might not matter, so I would have to spend $10,000 to have the cage redone, buy a tubular k member and control arms and other expensive parts just so I can race you and then come on here and brag about it if I beat you.

20 years from now I can tell my grand kids how I drove to Ohio to beat Mike Leech....WHO??????


My motor w my heads will be in my car with me driving.
We are going to race for $5000 minimum. $1000 is a joke.

You are going to race in NA 10.5?

Obviously you feel those rules are fair so thats the rules we are going to use. Either at an NMCA race or in Norwalk WE WILL RACE.

PUT UP OR SHUT UP!!!!!!!!!

I want a rules committee if we do race at Norwalk, three people to make a determination on who wins and check if both cars are conforming to the agreed terms. The race will be best out of three to eliminate mishaps.

This is it, this is all I am saying on this subject.

FAIR RULES, FAIR RACE

[Chris Uratchko]

Originally Posted by Stan Weiss

G I G O

Stan

LoL

[mike leech]

Originally Posted by KO

BECAUSE YOU WONT BEND AN INCH!

my car weighs 3300# and is not certified to run quicker than 8.50 which might not matter, so I would have to spend $10,000 to have the cage redone, buy a tubular k member and control arms and other expensive parts just so I can race you and then come on here and brag about it if I beat you.

20 years from now I can tell my grand kids how I drove to Ohio to beat Mike Leech....WHO??????


My motor w my heads will be in my car with me driving.
We are going to race for $5000 minimum. $1000 is a joke.

You are going to race in NA 10.5?

Obviously you feel those rules are fair so thats the rules we are going to use. Either at an NMCA race or in Norwalk WE WILL RACE.

PUT UP OR SHUT UP!!!!!!!!!

I want a rules committee if we do race at Norwalk, three people to make a determination on who wins and check if both cars are conforming to the agreed terms. The race will be best out of three to eliminate mishaps.

This is it, this is all I am saying on this subject.

FAIR RULES, FAIR RACE

You are a sissy. Your grandkids won't even know who you are.



Did you just asked for a rules committee for a grudge race? You're not a sissy you're a pussy

Do you know where I'll be you know what I/O way I'm not changing **** so figure it out