Quote:
Originally Posted by Dick Boneske
You can wrap a nylon lifting strap around the bottom of your floor jack and over the A arm. Jack the lower A arm up while the strap holds the upper. It's really quite easy and very safe.
|
I have done that too with a proper strength nylon strap. The jack now has something to work against.
I do not see a coil spring compressor in your spring. At the minimum you should have a piece of ready rod and a nut on each end to keep the spring from flying out of the control arm if the jack were to slip off the lower control arm.
Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|
05-22-2015, 10:26 PM
Hybrid Mode
