#1  
Old 06-30-2015, 04:40 PM
lfdsteve's Avatar
lfdsteve lfdsteve is offline
Chief Ponti-yacker
 
Join Date: Mar 2010
Posts: 922
Default

Quote:
Originally Posted by Tom Vaught View Post
I apologize to the PY board for replying to attacks on my name and character.

I really need to stop doing that. I have kicked his butt with logical answers EVERYTIME we have sparred. Still some are slow learners, including me.

Tom V.
Complete outsider perspective and not that my opinion means a hill of beans but you just went from respected enthusiast in my mind to very scarry almost to the point of troll kinda deal in like 10 posts...
That whole "I know where you are" bit is alarming to say the least.
Steve

__________________
462 Yc Block, zero deck
Probe forged pistons 6cc relief, Scatt Hbeam rods floating pins aprox. 10.21 CR
Comp Hyd-roller cam,roller lifters,springs ect.
236 244@ .050 108 LSA .511 lift, duration 289,297 @.oo6
Edelbrock Aluminum 87cc round port heads Larger valves ,ported polished and cut
Powerjection3,T2 manifold, Try-y’s
Flowcooler water pump.
71 formula with TKO600,hydraulic clutch 3.42 posi and 26 inch tire.
17x9 YO Honeycombs with Nitto 555's
  #2  
Old 07-01-2015, 09:09 AM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

Quote:
Originally Posted by lfdsteve View Post
Complete outsider perspective and not that my opinion means a hill of beans but you just went from respected enthusiast in my mind to very scarry almost to the point of troll kinda deal in like 10 posts...
That whole "I know where you are" bit is alarming to say the least.
Steve
Sorry that you are reading a lot into some words that are really saying what you think.
George works for a big company. george posts a lot at around 10:30 in the mornings.
George does have a job at this company so 99% chance that some posts are from work.

George wants to retire after 40+ years of probably excellent service with his company.
Why would you want a guy to get fired for violating company policy with being so close to retirement?

I simply posted be careful on the internet stuff at work.

So ifdsteve, you are out of line, as are others.

One thing to argue about racing and boosting philosophies.

Another to "stand by with your mouth shut when 'the bus could run over the person' and screw up the persons retirement.

Really sad what this board has come to as far as attacking the most simple post by someone.

Lots of "tag along" including some by a guy who I helped and assumed was a friend.

Wallace and his brother were smiling from ear to ear when they first purchased the Turbos from me for their project.
McQueen acquired some special water pumps I had custom made for his project. Yet both of them throw me under the bus, typical Pontiac behavior.

Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.

Last edited by Tom Vaught; 07-01-2015 at 09:14 AM.
  #3  
Old 07-01-2015, 09:21 AM
Stan Weiss's Avatar
Stan Weiss Stan Weiss is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: Philadelphia, PA
Posts: 5,339
Default

Quote:
Originally Posted by Tom Vaught View Post
Sorry that you are reading a lot into some words that are really saying what you think.
George works for a big company. george posts a lot at around 10:30 in the mornings.
George does have a job at this company so 99% chance that some posts are from work.

George wants to retire after 40+ years of probably excellent service with his company.
Why would you want a guy to get fired for violating company policy with being so close to retirement?

I simply posted be careful on the internet stuff at work.

So ifdsteve, you are out of line, as are others.

One thing to argue about racing and boosting philosophies.

Another to "stand by with your mouth shut when 'the bus could run over the person' and screw up the persons retirement.

Really sad what this board has come to as far as attacking the most simple post by someone.

Lots of "tag along" including some by a guy who I helped and assumed was a friend.

Wallace and his brother were smiling from ear to ear when they first purchased the Turbos from me for their project.
McQueen acquired some special water pumps I had custom made for his project. Yet both of them throw me under the bus, typical Pontiac behavior.

Tom V.
Tom,
What is really sad is you trying to explain to everybody who has read what you posted, and how all of us have misunderstood what you wrote.

Stan

PS - Yes Lil Jack I have derailed this thread again

__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm
  #4  
Old 07-01-2015, 09:40 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Quote:
Originally Posted by Stan Weiss View Post
Tom,
What is really sad is you trying to explain to everybody who has read what you posted, and how all of us have misunderstood what you wrote.

Stan

PS - Yes Lil Jack I have derailed this thread again

Basically Tom's doing Michael Jacksons Moon Walk! LOL!!!!!
As for "Thy Race" it will never happen, Jack (or will he) won't run the 1/4 mile and it's too bad I think it will be a heck of a race!


GTO George

  #5  
Old 07-28-2015, 01:02 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Quote:
Originally Posted by GTOGEORGE View Post
As for "Thy Race" it will never happen, Jack (or will he) won't run the 1/4 mile and it's too bad I think it will be a heck of a race!


GTO George

I called it a long time ago..............racing at Norwalk still will go on!!


GTO George

  #6  
Old 07-01-2015, 12:02 PM
twooldgoats's Avatar
twooldgoats twooldgoats is offline
Ultimate Warrior
 
Join Date: Sep 2002
Location: Tucson, AZ
Posts: 2,886
Default

Quote:
Originally Posted by Tom Vaught View Post
...... Yet both of them throw me under the bus, typical Pontiac behavior.

Tom V.
You dove under the bus on your own on this deal, Tom.

Jim

__________________
****'63 Tempest, 475" IAII, Wenzler Super Chief heads, converted to blown alcohol, Birdcatcher, Littlefield 10-71 high helix. Best pass to date: 7.67 @ 181.59 (1/4 mi.), 4.95 @ 143.67 (1/8 mi.), 1.18 (60 ft)

7.75 @ 178 pass:
https://www.youtube.com/watch?v=Iez3...ature=youtu.be

First seven second pass(7.98): https://wwwoutube.com/watch?v=DK17...ature=youtu.be



Thanks to Paul Carter @ Koerner Racing Engines




  #7  
Old 07-01-2015, 12:16 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

Quote:
Originally Posted by twooldgoats View Post
You dove under the bus on your own on this deal, Tom.

Jim
Maybe so Jim. Everyone has an opinion.

I do have an issue with comments like Steve posted who gets the story totally wrong though. Again My daughter, everyone is the only one I spoke of. Cheeeeze.

If you can't figure out the daughter part of the deal then the Internet Policy deal for major companies is WAY OVER YOUR HEAD.

Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:25 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017