[brucee70]

Originally Posted by ho421

Geez.. the gift that keeps on giving. take a look at what happened tonight while torqueing my P/S LB elbow to 25lb. it was at 20 when I decided to bring it within spec (25-35). Now what? 88.00 for a fabcraft repro or ditch them and go with RARE's LB1's? I wanted to keep this looking relatively stock and open up the exhaust in a couple years after a few shows.

Oh my ....such a pain. I'd put another on and just tighten to hold ...don't think the spec is critical there ...as long as it doesn't leak.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[ho421]

Originally Posted by brucee70

Oh my ....such a pain. I'd put another on and just tighten to hold ...don't think the spec is critical there ...as long as it doesn't leak.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Just told my wife better it happened to me than at the shop. The dude would've been beside himself if he had done it. it must have had a hairline crack in it. 20ft/lbs is nothing with that sized bolt and I'm sure it would've leaked. what a bummer. a ceramic coated original part. perhaps I'm not the first. why else is fabcraft selling them.