[Norwood]

Originally Posted by Brewster

Ha, your right Steve I hope I didnt offend anyone let alone her

That girl is tuff and it would take a lot to offend her. I'm thinking your ok Brew

[Judge273]

Going to the junkyard this morning in Arizona. I'll keep a look out for one.

Like this...

[Bentwheelbob]

Thanks Mike, that would be great. See if you can also spot a charcoal canister evap hose that shows the stamping. I am curious if it is stamped 1/4" EVAP or 1/4 EVAP. I have seen both stampings and not sure what is correct. The stamp sold by Inline does not have the inch marks ( " ) and they usually get it right.

[Judge273]

No luck! No second gen cars.

[PB]

Originally Posted by Bentwheelbob

Thanks Mike, that would be great. See if you can also spot a charcoal canister evap hose that shows the stamping. I am curious if it is stamped 1/4" EVAP or 1/4 EVAP. I have seen both stampings and not sure what is correct. The stamp sold by Inline does not have the inch marks ( " ) and they usually get it right.

I've got a few I've stashed away over the years. You looking for one so you can accurately reproduce the stamping? Not too many long ones, but I Cobb all the original hoses I can. What you need BOb?

[Bentwheelbob]

Originally Posted by PB

I've got a few I've stashed away over the years. You looking for one so you can accurately reproduce the stamping? Not too many long ones, but I Cobb all the original hoses I can. What you need BOb?

Pat - thanks for responding. For now, if you could just post a good picture of the 1/4 EVAP hose and stampings I would be appreciative. Also a dimension on how far apart the stampings are on the hose. I am planning to make a jig this weekend to hold the hose and keep the rubber stamp properly located, but would like to see a good original first.

[Judge273]

Arizona junkyard not a good place for rubber products. Dry rot hoses everywhere.

[PB]

Originally Posted by Bentwheelbob

Pat - thanks for responding. For now, if you could just post a good picture of the 1/4 EVAP hose and stampings I would be appreciative. Also a dimension on how far apart the stampings are on the hose. I am planning to make a jig this weekend to hold the hose and keep the rubber stamp properly located, but would like to see a good original first.

Here's the one in my car now. I'll take some pics of the other hoses and post them tomorrow. So you telling me that inline tube sells the evap stamp?
Cool....just looked it up. I'd just use that spray engine paint for the blue color. Spray some out and dip away. Gotta be close to the same color blue stamping.

[Bentwheelbob]

Thanks Pat. Yeah the Inline stamp matches your original hose. One other I have seen had the stamps much closer together and had the inch Mark ( " ) after the 1/4 which doesn't match the Inline stamp or your original, and the order is different. Look forward to seeing what I can do this weekend....

Here is the other I have seen.

Originally Posted by PB

Here's the one in my car now. I'll take some pics of the other hoses and post them tomorrow. So you telling me that inline tube sells the evap stamp?
Cool....just looked it up. I'd just use that spray engine paint for the blue color. Spray some out and dip away. Gotta be close to the same color blue stamping.