[rohrt]

Originally Posted by brians

Been stamping the upper and lower pans for about 15 years in upper Ohio. I’m probably one of the only fools out there that would spend the amount of money I did on large forming dies for such a small run of pans but just love the 68 RA cars. Used two of mine and Barry Martin brought a couple to Norwalk to get good dimensions off of.

Made the correct foam seals only because I needed them for my 68 FB and they were never the right shape. (They are not in any catalog only sell them directly)


Parts Place use to purchase the pans from us but then decided to take them and send them to China to duplicate. On a good note, for some reason China punched extra holes in the upper pan so it is easy to tell at a show if they are ones imported by Parts Place.


Rohrt – If you are interested in a kit, shoot me a pm.
If you are interested in saving some money and doing some strip and painting, have a few lower pans that the paint came out crummy.

Brian

And right there is one more reason for me to hate the parts place. I will be sending you a PM.

[Greg Reid]

Originally Posted by rohrt

And right there is one more reason for me to hate the parts place. I will be sending you a PM.

And if you read my post, you now know who I got mine from. If you click the link in my post, you'll find pics of the actual parts I recieved from Brian.

[Donovan]

Originally Posted by rohrt

And right there is one more reason for me to hate the parts place. I will be sending you a PM.

I also got mine from Brian.... excellent.

[The Boss]

Originally Posted by rohrt

And right there is one more reason for me to hate the parts place. I will be sending you a PM.

Oh there are plenty of reasons you can do that - I think everyone here has one (at least) of their own!

I have an original pan set for my 68 but have Brian's foam.

[TedRamAirII]

I may have bought upper and lower foam for my Firebird from you on Ebay? I can say, its the best. After 2 tries from NPD, their foam was CRAP.