| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
06-23-2016, 11:01 PM
|
||||
|
||||
Crower to the rescue! I had a set of Crower 1.60 rockers here for another engine so I used one to check to see if they would clear, and they cleared by a mile, so customer had a set of 1.65's drop shipped to us. I'm kind of glad the Aluminum rockers hit because I really don't like running aluminum rockers with solid roller cams.
 Figured out pushrod length, and ordered some thickwall pushrods from Smith Brothers.    Because of the tight lash cam[it only calls for .014" lash], and the aluminum block and heads, I had to set the cold lash at 0. I'm figuring it will grow around .014". So I will lash it when it heats up on the dyno.
__________________
Paul Carter Carter Cryogenics www.cartercryo.com 520-409-7236 Koerner Racing Engines You killed it, We build it! 520-294-5758 64 GTO, under re-construction, 412 CID, also under construction. 87 S-10 Pickup, 321,000 miles 99Monte Carlo, 293,000 miles 86 Bronco, 218,000 miles |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
