| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
07-07-2016, 06:52 AM
|
||||
|
||||
How much HP are you looking to make first off?
Those heads will not work with a out of the box rpm manifold and a 750 Q jet Carb will be a restriction in and of itself on a 428 or larger motor above 5400 rpm with theses heads dependant on how it's Camed. The flow level of the out of the box heads will overwhelm that rpm Intake manifold and even worse the limiting HP factor of that it will narrow up on the motors power band and make that band more peaky! A Victor or similar Intake is the only way to go, and to use such the car needs the gearing for it, and once your into the Victor manifold your Q jet can not be used . You did not post much info, but I think your looking to bolt on way too much head for the way your car is set up right now to make full use of it Also if you have D port headers now your into a real good chunk of money stepping into the needed round ports!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
|
#2
07-07-2016, 11:54 AM
|
||||
|
||||
|
A Victor or similar Intake is the only way to go, and to use such the car needs the gearing for it, and once your into the Victor manifold your Q jet can not be used .
Some of the SS racers still use a Qjet with a Victor. GTO Karl here used one on his street car and a Qjet had a nice adapter he made.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune [email protected] 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs 1964 Corvette Coupe 327 4 speed |
|
#3
07-09-2016, 03:53 PM
|
|||
|
|||
|
hi-ports
Hello all,I have a 4" stroke & 4.210 bore engine,do you think an original Nash intake will work ? Also what size valves would you order using a single pattern solid roller with 270 at .050 and .420 lobe lift. Thanks
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
