#1  
Old 07-12-2016, 08:03 AM
etd66ss etd66ss is offline
Senior Member
 
Join Date: Jul 2015
Posts: 159
Default

Quote:
Originally Posted by thews View Post
Just my 2 cents, but what you "save" in the initial cost on a project like this isn't worth it in the long run. Not sure what you'll pay for it, but it looks to have rust and rust costs the most to repair (unless you're skilled in body/paint work). If the car is taken apart, you can probably bet on parts missing. Paying more for a complete running car is a lot easier.

The caveat to this would be rarity. If you find a very rare car it may be worth it to bring it back to life, but, if you're going to do a restomod it really doesn't matter how rare it is. Good luck either way. One more old bird on the road is always a good thing.
I am experienced in doing metalwork on cars, this is the project where I will "force" myself to learn bodywork/paint. I plan to pretty much do all the work myself. And yes, it would be an LS restomod, flushmount glass, etc.

I don't think it makes much sense if I can't get the car for $2500 at most.

I understand for a project like this, I will have more into the car than it will be worth when done, I'm not a flipper etc.

__________________
SOLD 72 GTO: http://imgur.com/a/NvOUg

My Chevelle project: https://imgur.com/a/v2PHi#0
  #2  
Old 07-12-2016, 07:45 PM
thews thews is offline
Ultimate Warrior
 
Join Date: Feb 2013
Posts: 4,294
Default

Quote:
Originally Posted by etd66ss View Post
I am experienced in doing metalwork on cars, this is the project where I will "force" myself to learn bodywork/paint. I plan to pretty much do all the work myself. And yes, it would be an LS restomod, flushmount glass, etc.

I don't think it makes much sense if I can't get the car for $2500 at most.

I understand for a project like this, I will have more into the car than it will be worth when done, I'm not a flipper etc.
For $2500 I think you'd be paying too much. Not sure how much of a hurry you're in, but project cars come up fairly often on eBay. Guy buys a car and takes it apart. Has the engine done and the quarters, then it sits... time goes by. When selling a project like that, a lot of times it comes with a bunch of new parts. I've seen them in the $5K range and know there's twice that in them.

This car looks scary because the entire front end has been taken off. Was it crashed? Again, good luck, but finding the right car can be part of the fun. I bought my 69 convert of eBay about 5 years ago. Flew into St. Louis, checked the car out and loaded it on a U-Haul with all the parts and drove it home. I paid the guy in cash and was sure the title was valid... it was worth the drive.

  #3  
Old 07-13-2016, 05:50 AM
etd66ss etd66ss is offline
Senior Member
 
Join Date: Jul 2015
Posts: 159
Default

Yeah, I think it is best to find a complete car, but ofc sellers want much more for a complete "barn find"...

It's getting harder to come across sellers who are reasonable about the value of their cars.

__________________
SOLD 72 GTO: http://imgur.com/a/NvOUg

My Chevelle project: https://imgur.com/a/v2PHi#0
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:48 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017