[blueghoast]

Originally Posted by ta man

462 85 cc SD KRE 290 cfm heads,SD's "Old Faithful"HYD roller cam,1.65 Harland Sharpes,Torker 2 untouched,Wilson one inch four hole spacer,Holley 950 HP with 50 cc pump on front,Spectre 4 inch cowl air cleaner,30 degrees total timing,12 degrees intial,all in by 2800 rpm,Hooker 1 3/4 inch Super Comps.3 inch PYPES X,cone reducers into Walker 2.5 inch Ultraflows,2.5 inch tailpipes,10 inch 3200 Continental Convertor(over ten years in service now..four different 455 combos and two cars),th 350 ,3.08 rear gears

What size tire do you have on your car?

Thanks GT.

[ta man]

Originally Posted by blueghoast

What size tire do you have on your car?

Thanks GT.

New set..275/60/15 Mickey Thompsom et pros...they are slightly larger than the old et streets in diameter and a slightly wider footprint...It looks like Saturday I will be testing the carb main body at the track to see how it works...Also Andy and Chris are going...both will rock the strip!

[cnc]

Originally Posted by ta man

New set..275/60/15 Mickey Thompsom et pros...they are slightly larger than the old et streets in diameter and a slightly wider footprint...It looks like Saturday I will be testing the carb main body at the track to see how it works...Also Andy and Chris are going...both will rock the strip!

Yep lookin forward to it first time out with drag radials ....need to learn on how to get the tires sticky....

[ta man]

Big burnout!If the tires don't collect everything on the return road they aren't hot enough!My best 60ft last time was the best burnout.....Andy's buddy Paul was running beside me!I'm hoping with the new tires I don't need to melt them to stick!