[mike leech]

Originally Posted by Half-Inch Stud

Mike, hmmmm, if your ring-pinion is still swimming in 80-90W then please look into draining it ut, wiping everything clean, solvent spritz, then reload with the Redline stuff. Definite reduced temperatures.
....and reduced parasitic HP losses.

I'm running Dewco lube. If I didn't know better I would think it was 10 W 30. Super light weight

[Half-Inch Stud]

Originally Posted by mike leech

I'm running Dewco lube. If I didn't know better I would think it was 10 W 30. Super light weight

Check the Red Line stuff; likely thinner, likely slipperier, likely never get dark colored after many runs.

[Anderson Port Development]

Originally Posted by mike leech

I'm running Dewco lube. If I didn't know better I would think it was 10 W 30. Super light weight

... c'mon Mike, you gotta step up to the 0/10 ultra thin weight stuff, and see what really low oil pressure looks like ...

[john marcella]

Originally Posted by Anderson Port Development

... c'mon Mike, you gotta step up to the 0/10 ultra thin weight stuff, and see what really low oil pressure looks like ...

He's talking about rear gear oil. Not motor oil. And 0/10 is chicken chit. 0 /2 and 0/5 is trying! But not for me.lol

[Anderson Port Development]

Originally Posted by john marcella

He's talking about rear gear oil. Not motor oil. And 0/10 is chicken chit. 0 /2 and 0/5 is trying! But not for me.lol

... I know, I saw his pretty blue stuff laying on top of the heads, at Norwalk , I was just trying to make him laugh ... Lol

[mgarblik]

Next year a few of the OE's will introduce oil that has 0W/-7 viscosity. Also 0W/-5. That's some thin oil! All about fuel mileage with the OE's. That's a negative viscosity number I am trying to show.