[Engine-Ear]

Originally Posted by U47

My 62 has not a bent up one, but a twisted one but will have to be straightened. Sure I would buy one. But figure on something else. Those fasteners are impossible to find as well. If you sell the molding you'll have to sell the fasteners that go with it.
BTW if you think this piece is unique to getting hit try the 59 Pontiac trim piece on the trunk edge, and when a 59 is damaged it REALLY shows

Good suggestion... and to complicate things further, there are TWO versions of the clips that hold the '62 deck lid trim.

[U47]

Originally Posted by Engine-Ear

Good suggestion... and to complicate things further, there are TWO versions of the clips that hold the '62 deck lid trim.

Yes, and the body side molding for the quarter panel and doors also have two types of fasteners. The trim molding for the upper portion quarter panel also have two types of fasteners.

[mgarblik]

Are the clips specific to the trim design? Or will either style clip work with a given piece of trim. I have no idea how my car was put together.

[U47]

Originally Posted by mgarblik

Are the clips specific to the trim design? Or will either style clip work with a given piece of trim. I have no idea how my car was put together.

Yes, in most cases