| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
If you're going to use 80+ year-old technology, why not just use the OEM pulleys and brackets?
A "properly engineered" serpentine system is tough to beat. Less power loss through belt friction, automatic tensioning, simple belt replacement after 80,000 miles or so. Problem I see is that aftermarket accessory-drive "engineers" appear to be morons. They fail to provide adequate belt wrap, or the accessories stick up so high they look like Mickey-Mouse ears. Judging by the "Beast" photo on the CVF web site, I'm very unimpressed with the belt wrap on the PS pump, the crank wrap looks marginal, although the A/C, alternator, and water pump look OK. WHERE is the automatic tensioner? OEMs have proven them for the last 30+ years. (They're included in the "Wraptor" system, at $1600+) None of the photos show how the accessories are braced from the rear. I can imagine them vibrating if CVF failed to provide adequate support in all three dimensions. https://www.cvfracing.com/Pontiac-Pe...ries-s/219.htm Last edited by Schurkey; 06-12-2017 at 02:18 PM. |
|
#2
|
|||
|
|||
|
Quote:
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies - Build Thread http://forums.maxperformanceinc.com/...615847&page=23 |
|
#3
|
||||
|
||||
|
Quote:
Never understood why someone would go thru the trouble to design a serp setup and not use a type 2 pump, tensioner, and not use 1 belt? Duh. .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|