[U47]

Originally Posted by Stuart

I'd guess that out of anyone who has responded to this thread, Steve is the one person who would really know how to rebuild one of these things.

That's why I asked the question about all the parts and measuring, plus the 40 springs that need to have their tensions measured. The thrust bearings and washers, springs etc. are not in a master rebuilding kit, neither are the sprag and roller clutches.. There are 27 special tools for this trans so does he have them?
My question was does he have all these things?? Measuring devises, spring scale, parts access to thrust washers, and thrust bearings, springs, roller clutch, sprag clutch. Pump etc.
There was no response.

[lilabner]

Originally Posted by U47

That's why I asked the question about all the parts and measuring, plus the 40 springs that need to have their tensions measured. The thrust bearings and washers, springs etc. are not in a master rebuilding kit, neither are the sprag and roller clutches.. There are 27 special tools for this trans so does he have them?
My question was does he have all these things?? Measuring devises, spring scale, parts access to thrust washers, and thrust bearings, springs, roller clutch, sprag clutch. Pump etc.
There was no response.

It's not as hard to rebuild as it is to find the parts for it or to adjust the throttle pressure. You have to be do some research and find all the updates. I found a Motors Automatic Transmission Manual 5th edition that had the updates. Then after some more reading I bought this book considered to be the Bible of secrets and tricks.

http://transgo.com/products.php?cat=...&parent_id=167