| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
Great job John! That's hauling
![]() Brian
__________________
Boobs & bacon
|
|
#2
|
||||
|
||||
|
I was thinking putting my 390's back in.
__________________
71 Lemans Sport. 72 Lemans Sport. RIP 75 Grandville Convertible. |
|
#3
|
||||
|
||||
|
How do I check how much the convertor is slipping?
__________________
71 Lemans Sport. 72 Lemans Sport. RIP 75 Grandville Convertible. |
|
#4
|
||||
|
||||
|
Take your rpm at the stripe and compare it to what the number is when you take mph, rear gear and tire height.
Brian
__________________
Boobs & bacon
|
|
#5
|
||||
|
||||
|
John, how much power did your engine make?
Brian
__________________
Boobs & bacon
|
|
#6
|
||||
|
||||
|
We put the motor on the dyno when the heads flowed 400 cfm and it made 872 hp and I think it was 770 ft lbs of tq.
__________________
71 Lemans Sport. 72 Lemans Sport. RIP 75 Grandville Convertible. |
|
#7
|
||||
|
||||
|
145.31 x 4.30x 336/29.5 = actual rpm(7116)
I didn't know what tire your running i guessed at 29.5 and if right your slipping almost 900 rpms on top, if taller its worse even.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#8
|
||||
|
||||
|
Going by Darby's numbers, that's 11% slippage.
Brian
__________________
Boobs & bacon
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|