 |
|
| Pontiac - Boost Turbo, supercharged, Nitrous, EFI & other Power Adders discussed here. |
| Reply |
|
|
Thread Tools | Display Modes |
|
|
|
#1
05-13-2018, 08:40 PM
|
|||
|
|||
Professional products just the basic one around 100.00 ... will check the top of piston when at zero Tomorrow ...
|
|
#2
05-14-2018, 01:25 PM
|
||||
|
||||
|
Quote:
If you use a piston stop on the #1 cylinder and lightly turn the engine over in a counter clockwise direction, touch the stop, make a mark on the balancer (tape a piece of paper on the balancer), then rotate the engine clockwise until you are touching the piston stop again, make a mark, 1/2 way between the two marks should be true Top Dead Center for your engine. Then you can determine your timing if you have a normal pontiac timing cover. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
