1) Pay money for a C&S Holley Square Bore Carb $$$ and then the carb/engine will run right with boost.
2) People make shaker hood scoops work with Square Bore Holleys all the time. Not typically with Bonnets on them though.
3) Ken Crocie did a Blow-thru Q-Jet Bonnet/Shaker deal that took a bunch of effort (Dyno Time) to get right but you would need his other hardware. Very Rare.
No easy way to keep the Shaker on the engine without some effort and a bunch of fab work.
The Box would allow you to bolt the shaker on the Box and run low boost with the Shaker still shaking.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|
05-16-2018, 06:43 PM
Hybrid Mode
