[LiL Jack]

Originally Posted by Anderson Port Development

... do you really believe the retarded nonsense you post Jack ?? ...

... or is it just your little internet game you blame your BS on ?? ...

... you already know Robin is building a new CV-1 combo i'm sure, as he's posted pictures and descriptions of what he's building, but hey maybe you've not seen that info yet i don't know ...

... here are some of Robin's pics he posted, i want you to be up to date and all ...

I started a new thread for you.

[Anderson Port Development]

Originally Posted by LiL Jack

I started a new thread for you.

... lol, you didn't start that thread for me clown, that's just more of your retarded BS ...

... try again stupid, i'm on the phone with Robin right now and he's laughing at you ...

[LiL Jack]

Originally Posted by Anderson Port Development

... lol, you didn't start that thread for me clown, that's just more of your retarded BS ...

... try again stupid, i'm on the phone with Robin right now and he's laughing at you ...

Did he say CV1TTFMF?


We were all laughing when he burned that pos up trying to go 7s.

[Anderson Port Development]

Originally Posted by LiL Jack

Did he say CV1TTFMF?


We were all laughing when he burned that pos up trying to go 7s.

... good lord Jack, where in the world do you come up this BS ?? ...

... Robin has NEVER burned up anything, not even a head gasket or a piston, so WTF are you talking about ?? ...

... would you like Robin to come in here and correct you ?? ...

... you know i'm joking about the Plumber Manual right ?? Put that thing away it's rotting your brain !!! ...

... so let me get this straight, it's funny to you when a Pontiac guy burns something up, or just if a CV-1 guy burns something up ??? ...

[Rusty4cyl]

I have to comment on this.Your 1000% crystal clear fact is wrong. I went slower with a CV-1 head than I do with the wide port Edelbrock head. Same cam same comp same gear's, same everything. I even tried lower gears in rear, ran the same. Then it was the intake, so I bought a tunnel ram from Jim. same thing. ran slower. SO I have a nice CV-1 head and intake and component's that you should buy off of me, because you love them so. I guess the name calling will start now. Right Mr Wonderful LOL

[GTOGEORGE]

People need to stop beating the dead horse because it’s just stupid now!


GTO George

[Anderson Port Development]

Originally Posted by Rusty4cyl

I have to comment on this.Your 1000% crystal clear fact is wrong. I went slower with a CV-1 head than I do with the wide port Edelbrock head. Same cam same comp same gear's, same everything. I even tried lower gears in rear, ran the same. Then it was the intake, so I bought a tunnel ram from Jim. same thing. ran slower. SO I have a nice CV-1 head and intake and component's that you should buy off of me, because you love them so. I guess the name calling will start now. Right Mr Wonderful LOL

... so your build certainly was unique to say the least, but once your factory 4cyl blocks & cranks started breaking well, yeah your result doesn't surprise me ...

... and if you don't want to be name called then don't come at me with your nonsense as you were not my customer ...

[7T2]

Originally Posted by Rusty4cyl

Then it was the intake, so I bought a tunnel ram from Jim. same thing. ran slower.

rusty,
agree the first sheet manifold from Hogan was a disaster. then i decided only way to fix that was to fab up half a cast t -ram to replace it...which i made nothing on.. how many runs did you put on that t-ram setup?

iirc- first time out w/ said manifold your heads lost compression, so you sent 'em to local shop where they told you whoever did the valvejob cut the seats so thin, they coined the phrase "wedding ring" seats. they moved, causing your issue.

at that point, you gave up on your head.

hated losing you rusty, but some stuff just isnt my fault,
jim

[Mighty T/A]

Originally Posted by LiL Jack

We were all laughing when he burned that pos up trying to go 7s.

Really??? You were laughing.

I can't think of anyone I don't like enough to laugh if they were to burn up an engine. In fact, I can't think of anyone, even rivals, even you, or people I am sure I don't want to be associated with that I wouldn't help push back to the trailer and genuinely say how sorry I was that they had broken. To me this just shows your true character and how deep that jealousy is.

It also shows more ignorance. I did burn an exhaust valve once in one of my early sets of CV-1 heads running in Tucson where I was worried about the altitude and dry air (low water grains) and had the timing backed down too low trying to sneak up on it. I know you know, because the next day you were on Yellow Bullet asking how you burn an exhaust valve on nitrous. I just SMH! That's the only cylinder failure I ever experienced with a CV-1.

I burned a piston with a set of Tiger heads. I never said anything negative about the product. Why? Frank is a good dude, I am proud of them for building products and I can't say that I didn't have something off?? So, they took care of me and I didn't trash them, I praised them and still do. Guys like that have saved the Pontiac from extinction and they deserve credit. And so does Roland and Bill.

Just let it go!

[LiL Jack]

Originally Posted by Mighty T/A

Really??? You were laughing.

I can't think of anyone I don't like enough to laugh if they were to burn up an engine. In fact, I can't think of anyone, even rivals, even you, or people I am sure I don't want to be associated with that I wouldn't help push back to the trailer and genuinely say how sorry I was that they had broken. To me this just shows your true character and how deep that jealousy is.

It also shows more ignorance. I did burn an exhaust valve once in one of my early sets of CV-1 heads running in Tucson where I was worried about the altitude and dry air (low water grains) and had the timing backed down too low trying to sneak up on it. I know you know, because the next day you were on Yellow Bullet asking how you burn an exhaust valve on nitrous. I just SMH! That's the only cylinder failure I ever experienced with a CV-1.

I burned a piston with a set of Tiger heads. I never said anything negative about the product. Why? Frank is a good dude, I am proud of them for building products and I can't say that I didn't have something off?? So, they took care of me and I didn't trash them, I praised them and still do. Guys like that have saved the Pontiac from extinction and they deserve credit. And so does Roland and Bill.

Just let it go!

Actually, I did not laugh I was responding to Bills arrogant post.
I’m not happy when anyone hurts there motor or any part.

A person text me and told me you are an okay guy, which is what I gathered at Norwalk when we met briefly.
Sorry to say when Bill starts up and dragged your name into it then started saying I burned my E headed motor up which was a lie.
I didn’t like it.
Sad to say Bills attitude is a detriment to the CV1 cause. And a few others that don’t post anymore.
Have fun and race hard, good luck with your Pontiac motor in your T/A.

[Anderson Port Development]

Originally Posted by LiL Jack

Actually, I did not laugh I was responding to Bills arrogant post.
I’m not happy when anyone hurts there motor or any part.

A person text me and told me you are an okay guy, which is what I gathered at Norwalk when we met briefly.
Sorry to say when Bill starts up and dragged your name into it then started saying I burned my E headed motor up which was a lie.
I didn’t like it.
Sad to say Bills attitude is a detriment to the CV1 cause. And a few others that don’t post anymore.
Have fun and race hard, good luck with your Pontiac motor in your T/A.

... My attitude ?? ... ... you stated you were laughing about Robin burning it up, and then turn right around and say you weren't laughing ?? ...

... you're insane, i don't start any of this nonsense, you do and others and have been for almost 10 yrs but it's been me running my mouth starting all this huh ?? Lmao ...

... and i asked if you burned the engine up because that's what i was told, i did not state you burned it up and i certainly wasn't laughing about it either ... but after all this time of your relentless BS here you are pointing the finger at me like this is all my doing right ??? ... LMMFAO

... and you brought up Robin, not me, are you asleep when you post ?? ...

[LiL Jack]

Originally Posted by Anderson Port Development

... My attitude ?? ... ... you stated you were laughing about Robin burning it up, and then turn right around and say you weren't laughing ?? ...

... you're insane, i don't start any of this nonsense, you do and others and have been for almost 10 yrs but it's been me running my mouth starting all this huh ?? Lmao ...

... and i asked if you burned the engine up because that's what i was told, i did not state you burned it up and i certainly wasn't laughing about it either ... but after all this time of your relentless BS here you are pointing the finger at me like this is all my doing right ??? ... LMMFAO

... and you brought up Robin, not me, are you asleep when you post ?? ...

Go reread what you posted. You dragged your boy into this.
I just stated a fact in another thread that he put a 481x in his car.

[Slick]

Bill is a really good guy, loyal and always ready to help with advice and hard work. If you are his friend, he really is your friend, but he does not tolerate lies about him, his friends or colleagues.

It's pretty obvious here who is a liar, visious, cruel and just plain evil person. Most of us don't care if someone is different in person than on line. The only way many of us will ever meet is through forums such as these.

How one treats people on line is how one treats others when no one is looking or behind their back. Character matters.

I'm not Bill's customer yet, but I know I will be treated right when I am.

I would NEVER want to be the customer of the evil rotten person who started this.

Stuart

[gene simmons]

Originally Posted by Slick

Most of us don't care if someone is different in person than on line. The only way many of us will ever meet is through forums such as these.

How one treats people on line is how one treats others when no one is looking or behind their back. Character matters.
Stuart

Good point.

[LiL Jack]

Originally Posted by Slick

Bill is a really good guy, loyal and always ready to help with advice and hard work. If you are his friend, he really is your friend, but he does not tolerate lies about him, his friends or colleagues.

It's pretty obvious here who is a liar, visious, cruel and just plain evil person. Most of us don't care if someone is different in person than on line. The only way many of us will ever meet is through forums such as these.

How one treats people on line is how one treats others when no one is looking or behind their back. Character matters.

I'm not Bill's customer yet, but I know I will be treated right when I am.

I would NEVER want to be the customer of the evil rotten person who started this.

Stuart

You know what they say about opinions.

Let me know where I lied?

[JSPONT]

It was not Discovery that took them off, they took them off. In any show there needs to be good guys and bad guys otherwise the non car people would not watch it. They need them ratings!!

I am starting to like JJ Da Boss show better! I would rather watch S.O. rather than any other crap on TV.

[Aaron Quinton]

Another great post, thanks Robin.

I'm not sure if it's worth the effort to respond.

I'm with you, there wasn't a single person I would not help push or give parts to get running to the next round running a Pontiac. Things change.

I'll be ridiculed as being drunk or of my meds soon. It's the only tactics incapable people can implement.

Originally Posted by Mighty T/A

Really??? You were laughing.

I can't think of anyone I don't like enough to laugh if they were to burn up an engine. In fact, I can't think of anyone, even rivals, even you, or people I am sure I don't want to be associated with that I wouldn't help push back to the trailer and genuinely say how sorry I was that they had broken. To me this just shows your true character and how deep that jealousy is.

It also shows more ignorance. I did burn an exhaust valve once in one of my early sets of CV-1 heads running in Tucson where I was worried about the altitude and dry air (low water grains) and had the timing backed down too low trying to sneak up on it. I know you know, because the next day you were on Yellow Bullet asking how you burn an exhaust valve on nitrous. I just SMH! That's the only cylinder failure I ever experienced with a CV-1.

I burned a piston with a set of Tiger heads. I never said anything negative about the product. Why? Frank is a good dude, I am proud of them for building products and I can't say that I didn't have something off?? So, they took care of me and I didn't trash them, I praised them and still do. Guys like that have saved the Pontiac from extinction and they deserve credit. And so does Roland and Bill.

Just let it go!