Home Menu

Menu


Pontiac - Street No question too basic here!

          
PY Online Forums - Bringing the Pontiac Hobby Together > General Classic PONTIAC TECH > Pontiac - Street > Too Much Compression ?
Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2019, 07:37 PM
mchell's Avatar
mchell mchell is offline
Ultimate Warrior
  
Join Date: Jul 2003
Location: North Port, FL
Posts: 2,567
Default
Quote:
Originally Posted by TAQuest View Post
I followed your instructions. When I pressed on copy icloud link it said it was preparing then it went back to the video. I went to this thread and didn't know what to do next. I didn't see how to paste it in a message. How do you do that part?
Start a reply to this thread with your phone ....click anywhere in the reply window and “paste”

__________________
71 GTO, 463, KRE 295 cfm heads ported by SD Performance, RPM intake, Qjet, Dougs Headers, Comp cams HR 246/252 ...11 to 1 , 3.55 cogs, 3985lbs.....day three- 11.04 at 120mph ....1.53 60', 6.98 1/8 mile
Reply With QuoteReply With Quote
  #2  
Old 04-03-2019, 07:40 PM
TAQuest TAQuest is offline
Ultimate Warrior
  
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default
Quote:
Originally Posted by mchell View Post
Start a reply to this thread with your phone ....click anywhere in the reply window and “paste”
When I click on the reply window the keyboard pops up. How do you paste? Don't know how to do that with an iPhone.

Reply With QuoteReply With Quote
  #3  
Old 04-03-2019, 07:42 PM
mchell's Avatar
mchell mchell is offline
Ultimate Warrior
  
Join Date: Jul 2003
Location: North Port, FL
Posts: 2,567
Default
Quote:
Originally Posted by TAQuest View Post
When I click on the reply window the keyboard pops up. How do you paste? Don't know how to do that with an iPhone.
Tap on screen (once briefly)until you see blinking cursor....tapping again should show the paste option

__________________
71 GTO, 463, KRE 295 cfm heads ported by SD Performance, RPM intake, Qjet, Dougs Headers, Comp cams HR 246/252 ...11 to 1 , 3.55 cogs, 3985lbs.....day three- 11.04 at 120mph ....1.53 60', 6.98 1/8 mile
Reply With QuoteReply With Quote
  #4  
Old 04-04-2019, 10:23 AM
ta man ta man is offline
Ultimate Warrior
  
Join Date: Apr 2006
Location: Clinton,Ontario,Canada
Posts: 5,544
Default
It takes forever to load those videos. You need to take your revs up higher to see if there is a fuel pressure issue.

__________________

466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471
Reply With QuoteReply With Quote
  #5  
Old 04-04-2019, 10:35 AM
"QUICK-SILVER" "QUICK-SILVER" is offline
Ultimate Warrior
  
Join Date: Feb 2008
Location: Alexander City, Alabama
Posts: 5,561
Default
Quote:
Originally Posted by ta man View Post
You need to take your revs up higher to see if there is a fuel pressure issue.
RPM's is the problem or a symptom. Engine wont rev any higher. Almost like it has a rev limiter set at 3,000 RPM's.

Clay

Reply With QuoteReply With Quote
  #6  
Old 04-04-2019, 10:37 AM
TAQuest TAQuest is offline
Ultimate Warrior
  
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default
Quote:
Originally Posted by "QUICK-SILVER" View Post
RPM's is the problem or a symptom. Engine wont rev any higher. Almost like it has a rev limiter set at 3,000 RPM's.

Clay
Exactly! Acts like it's at 5500K when it's at 3200K.

Reply With QuoteReply With Quote
  #7  
Old 04-04-2019, 10:35 AM
TAQuest TAQuest is offline
Ultimate Warrior
  
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default
Quote:
Originally Posted by ta man View Post
It takes forever to load those videos. You need to take your revs up higher to see if there is a fuel pressure issue.
The fuel pressure video takes 3 minutes to load because I covered all the bases. The harder I drove it the steadier it stayed a 5 psi. The fuel pressure is just right for these carbs. When it cuts out the fuel pressure is a solid 5.
I make sure that each thing/test is covered completely so I don't have to wonder about that anymore.
The test drive video with the tach showing only took me just over a minute to download on my computer from the link here.
Thanks for your time.

Reply With QuoteReply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:20 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Contact Us Home
Copyright © 2017