[Norwood]

I bet it has a nice shaker

[necdb3]

Originally Posted by Norwood

I bet it has a nice shaker

You must have supplied parts???

[poncho4554spd]

Originally Posted by necdb3

You must have supplied parts???

Yes Craig did a nice job on the shaker parts.

[poncho4554spd]

I wanted to prepare the rear bumper for installation. It was a bit dirty and had some slight surface rust on the inside and the brackets were rusting. Since it is not perfect but is straight and was fitted to the car prior and this car will be driven frequently I chose not to completely remove everything but at the same time I wanted to do something. I did a polish on the outer chrome side then scuffed and treated the rust on the inside. Next I taped up the bumper and painted the inside area with seymour stainless steel paint, the taped out the mounting brackets and sprayed them black

[poncho4554spd]

I cleaned the dirt from the seats in preparation for the interior install hopefully soon., along with cleaning the lower valance before installing

[poncho4554spd]

Front lower valance and spoiler and a pic of the nose installed on the car before I pulled the car out and rinsed off. I still need to do some final fitting on the nose and hood to make it right

[poncho4554spd]

I do have to remove the fender decals because the guy I had do it put them in the wrong spot

[Baron Von Zeppelin]

Congratulations on buying the car and getting it finished up.
Its got a lot of good options.

Not sure if should mention this, but will in case it helps.
The screens in the fender extractors should be Black instead of Blue

[poncho4554spd]

Originally Posted by Baron Von Zeppelin

Congratulations on buying the car and getting it finished up.
Its got a lot of good options.

Not sure if should mention this, but will in case it helps.
The screens in the fender extractors should be Black instead of Blue

Thank you. Finally almost there.Yes I was wondering about that about the extractors.. I will add it to the small list of odds and ends to do yet.

[poncho4554spd]

Originally Posted by Norwood

I bet it has a nice shaker

Thanks guys and yes it has a beautiful shaker lol. I will post more as progress continues and I start to assemble.

[poncho4554spd]

Just wanted to do a quick update.I took an inventory of what's still with the car and what is missing.. I.started cleaning the dirt from the car and all of the parts that accumulated from sitting in my buddy's barn.. I have been slowly doing a little more work on the car. In the mean time I ordered carpet, decal kit, shaker wiring, rear emblem letters, headliner kit and other misc. Parts. I tried starting the engine today. But it is starving for fuel and the pump is barely pushing so I will add a new fuel pump to the list. I

[poncho4554spd]

Thanks its coming together