[dataway]

Originally Posted by 68ragtop

Found the thread.

2nd page was when I blasted mine. I know I used lower pressure (probably 50-60 PSI) but std medium sized beads.

Funny thing is you were involved in the conversation.

http://forums.maxperformanceinc.com/...=grills&page=2

Too much clutter in my mind

I'll give the bead a try, that's what's in the cabinet now anyway. Thanks for the thread reference I'll need that soon when I start painting.

Came up with an idea for the pins ... going turn up some aluminum studs/pins that clamp onto the mount where the pins were with a small screw through the back side and big wide flanges to spread the load ... should be almost invisible when painted black.