| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
05-14-2020, 09:34 AM
|
||||
|
||||
Good news, bad news. Good news is all nine fingers still intact! Bad news, I busted the spring trying to get another turn on it.
Cannot find a source for a new spring. Ordered a manual regulator for that side and will try and pillage it for the spring. Not opposed to returning it if there is a source out there. After thinking about it, was the spring already fatigued and not offering the assistance it should? After 50+ years, it stands to reason. The quarter windows are significantly lighter and work perfect further adding to my suspicions. Power and ground checked out. 1/10th volt loss between battery and window switch. 0 ohms resistance between regulator and body. I did install a new relay in the factory location.
__________________
If it's worth doing, it's worth overdoing! In the works; 400 based 468 Stroker. 4 Bolt mains, Fully forged rotating assembly, KB flat top, custom ground Comp hydraulic roller, KRE 85cc, 310 CFM heads, FAST multi port EFI. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
