[racerboy]

Originally Posted by wovenweb

Do you have the 60243 camshaft in hand? I haven't called to check on my order yet, they are showing various dates out a week (Crower website/e-mail) to August(Summit) for availability. I ordered one via Crower's website a couple days ago. I've got a 428 that I'm finally assembling, Icon pistons w/10cc dish. I have '68 #16 heads and compression calculates to about 10.5

Woven - isn’t that compression a bit high for pump gas, or do you have access to AV fuel or race gas to mix?


Sent from my iPhone using Tapatalk

[wovenweb]

Originally Posted by racerboy

Woven - isn’t that compression a bit high for pump gas, or do you have access to AV fuel or race gas to mix?


Sent from my iPhone using Tapatalk

My other engines are 12.0(Pontiac w/RA II heads), 10.2(Pontiac), 9.9(Buick) and a stock '71 455HO engine. No pinging on any of them. I do run 100+ octane in the 12.0. So, this is a little higher but nothing like the 12.0. I do have ready access to 93 here in Texas.