[GTOGEORGE]

Originally Posted by opeliac

It was a joke, backed by facts...If you cant piece it together, then I cant help ya.

I do what I do but you would know that if you actually knew me.
KRE shouldn’t even be in this conversation.

GTO George

[opeliac]

Originally Posted by GTOGEORGE

I do what I do but you would know that if you actually knew me.
KRE shouldn’t even be in this conversation.

GTO George

The fact is, you have a pair of Pom Poms with their logo on them...So, as a method of TEASING with you, I pointed out that you'd think the Marty rings were the best in the world if KRE used them...Remember George, i'm T E A S I N G you.

[GTOGEORGE]

Originally Posted by opeliac

The fact is, you have a pair of Pom Poms with their logo on them...So, as a method of TEASING with you, I pointed out that you'd think the Marty rings were the best in the world if KRE used them...Remember George, i'm T E A S I N G you.

Marty’s rings could be great…..go use them and tell us.
I have my own head gasket set up also I pretty sure no one are using ARP2000 head studs in a Pontiac like me. I also changed my main stud nut set up, damn I’ve changed so much on my engine combo!
FYI……KRE always has my back so I will always have theirs!


GTO George

[GTOGEORGE]

Originally Posted by GTOGEORGE

Marty’s rings could be great…..go use them and tell us.
I have my own head gasket set up also I pretty sure no one are using ARP2000 head studs in a Pontiac like me. I also changed my main stud nut set up, damn I’ve changed so much on my engine combo!



GTO George

So back on track!
opeliac, so what needed to be done with your rings to install them?

GTO George

[opeliac]

Originally Posted by GTOGEORGE

So back on track!
opeliac, so what needed to be done with your rings to install them?

GTO George

I'm working on that part now.

[GTOGEORGE]

Originally Posted by opeliac

I'm working on that part now.

Pics when you get them!


Thanks,
GTO George

[opeliac]

Originally Posted by GTOGEORGE

Pics when you get them!


Thanks,
GTO George

Pics of them. Now I gotta find someone to machine the block for them.

[opeliac]

George, what is the deal on the 2000 series head studs that you are talking about?

[GTOGEORGE]

Originally Posted by opeliac

George, what is the deal on the 2000 series head studs that you are talking about?

I found me a way to get a set of special ARP2000 1/2” head studs that would work on my Hp heads.



GTO George

[GTOGEORGE]

Picture of the ARP2000 head stud



GTO George

[Sirrotica]

George, are these the fasteners that can be affected from the oils on your hands? Some ARP fasteners you need to wear gloves when handling them.

[PAUL K]

Originally Posted by GTOGEORGE

Picture of the ARP2000 head stud



GTO George

Just curious George why don't you use the high quality studs your pals at KRE sell?

[73 TRANSAM]

Marty's ring, will cut into the head on its own. That is how it seals as the rings are not flat on one side. It is raised on the outer wall of the rings and that is responsible for sealing.