| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
I would check your cranking compression.
It sounds like your cam is in retarded. I have run a Isky 270 mega cam in a bone stock 77 400 with only 8 to 1 compression and not had to idle the motor that high.
__________________
I do stuff for reasons. |
|
#2
|
|||
|
|||
|
I checked with the previous owner and the cam was installed straight up.
__________________
1971 Trans Am - Sold 1977 Can Am - Sold 2002 Trans Am Firehawk - Sold 2004 GTO - Sold 2006 GTO - Sold 1970 GTO - Sold 1972 Trans Am - Sold 1970 Trans Am - Current Project |
|
#3
|
||||
|
||||
|
Do you have full battery voltage/current to the ignition coil for the Pertronix?
What carb-#? Is the idle/lowspeed circuit in carb adjusted/modified for the cam/today fuels? Are the S.C.S. and C.S.C. systems intact and functional? |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|