[70geeteeohh]

Originally Posted by 25stevem

I am constantly amazed by folks who post up questions as to how much power there new build will make!

Many of these builds are very high Dollar builds with aftermarket blocks , forged cranks and high port or wide port heads, the needed intake manifold and 1100 cfm or better carb, yet it seams these folks don’t believe what there engine builder has told them the motor will make, or they choose to not spend what it takes for even a cheap computer engine analyzer program to answer there own questions!

Excitement and curiosity almost always gets the best of us all. Honestly alot of people have to settle on an engine builder that's located in their area. Often times that builder may be adequate for the machining processes but not have the expertise and experience with a certain make/model engine.

I think it's alright to post about an engine build and possibly gain insight on if its gonna make the power it should or if it will be a mismatched disappointment.

Of course when they post about their engine and combination they get to hear 10% congratulate them on the build and 90% tell them where they are going wrong.