[tjs72lemans]

I replaced everything on my 72. I used Old Air a division of Classic Air. But, I didn't have a condenser, figured my compressor needed rebuilding, wasn't sure of condition of evaporator or poa valve or drier. Needed some brackets. My car was apart when I bought, so I had no history. I now have a functioning, cold blowing AC system that runs off about 5 hp rather than about 15 hp. It uses 134a. I also see that they rebuild compressors and poa valves if you go that way.

[Formulabruce]

Originally Posted by tjs72lemans

I replaced everything on my 72. I used Old Air a division of Classic Air. But, I didn't have a condenser, figured my compressor needed rebuilding, wasn't sure of condition of evaporator or poa valve or drier. Needed some brackets. My car was apart when I bought, so I had no history. I now have a functioning, cold blowing AC system that runs off about 5 hp rather than about 15 hp. It uses 134a. I also see that they rebuild compressors and poa valves if you go that way.

Did you use your stock evap case and inside controls? pic?