| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
We been wedging the thermostat open with a small baby aspirin or two. They dissolve after a few minutes time and leave no trace at all.
More stuff to buy…lol At least it takes care of coolant headaches |
| The Following User Says Thank You to Sun Tuned For This Useful Post: | ||
|
#2
|
||||
|
||||
|
Just to say, regardless of how you install the gears, to be sure when you stab the dizzy, you HAVE to rotate the crank to ensure you're on a compression stroke.
I personally prefer to watch the rockers, see the #1 intake valve close, then align the balancer mark with the timing mark. I also use the same method Cliff does, bringing the timing mark to 12 degrees and THEN stabbing the dizzy. This prevents the 'hunting' of turning the dizzy while cranking. This is 101 SOP imo. Kills me to see all the 'hollywood' shows with the flame thru the carb moment. Again, do what YOU feel is right, and have had success with. I'm not telling anyone what it 'right' or 'wrong' or how it 'must' be done, just what I've done for 40+ years and works for ME. .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
| The Following User Says Thank You to HWYSTR455 For This Useful Post: | ||
| Reply |
| Thread Tools | |
| Display Modes | |
|
|