| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
FWIW here is the same thing installed in my 65 Chevelle. I think Pontiac used a little chrome bezel and mounted it horizontally under the dash, but this is how they put them in Chevelles. The switch and wiring are all the same as Pontiac though.
https://www.youtube.com/watch?v=ZbOWf33oT7k I *think* this one shows more how Pontiac installed these. This was in my 65 Chevelle wagon. The bezels actually used may have looked different for Pontiac. But like I said above, the wiring and switch are all the same. In this instance I used a reproduction switch and had to rewire it a bit to fit the A-body system, but that was just get the wiring into that little half moon plug connector. I used my original referenced above as a guide along with a wiring schematic I found in a dealership accessories install manual. https://www.youtube.com/watch?v=hqQenB2mceU
__________________
The '64 GTO The '65 Chevelle The '69 Chevy Pickup Project The Brazen Orange 2006 GTO Last edited by Rich-Tripower; 10-19-2022 at 08:52 AM. |
|
#2
|
|||
|
|||
|
Thank you all for your responses. It was on the car when I purchased it. When I got the PHS documents I also ordered a reproduction window sticker. The flasher was not listed on the sticker. It is a Flare-Stat plug & play unit so I'm assuming it was dealer installed or a previous owner installed it. Thank you all again.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|