| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
02-22-2023, 01:06 PM
|
||||
|
||||
1) Check Choke Blade gap to airhorn when on the high choke step.
2) Check and adjust fast idle screw under electric choke housing. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#2
02-23-2023, 09:49 AM
|
||||
|
||||
|
OK, adjusted both, still doesn't really come up on a high idle. The fast idle cam is all the way up and the fast idle screw is maxed out. Choke flap adjusted so it just barely closes when cold. 15* base timing.
I'm assuming this thing is really rich with the choke on. What do I try next?
__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum. White '67 LeMans 407/TH350/Ford 3.89... RIP Red '67 LeMans. 407/TH400/Ford 3.25 |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
