[Formulajones]

Originally Posted by i82much

i switched to a wagner pcv. bought a cheap manometer and was able to clearly see higher crankcase vacuum at idle and under load vs several off the shelf pcv valves.

also reduced oil leaks noticeably.

formulajones what do you mean by different style? if you mean valley pan instead of valve cover, they make an adapter grommet if i recall.

I'd like to see a straight style to fit the molded hoses. The 90 really doesn't work unless I want to reconfigure the lines and wouldn't look quite right. Don't want to ditch the molded PCV lines, they are kinda expensive, lol.

[i82much]

Originally Posted by Formulajones

I'd like to see a straight style to fit the molded hoses. The 90 really doesn't work unless I want to reconfigure the lines and wouldn't look quite right. Don't want to ditch the molded PCV lines, they are kinda expensive, lol.

gotcha ... my engine compartment looks like it was plumbed and wired by a couple of drunken penguins, so the straight PCV valve is the least of my worries

[Formulajones]

Originally Posted by i82much

gotcha ... my engine compartment looks like it was plumbed and wired by a couple of drunken penguins, so the straight PCV valve is the least of my worries

LOL