#1  
Old 05-20-2023, 08:13 AM
PAUL K's Avatar
PAUL K PAUL K is online now
Ultimate Warrior
 
Join Date: Feb 2004
Location: Sugar Grove IL USA
Posts: 7,441
Default

I have one that needs cleaning. A buddy said that he takes them apart all the time to clean them for customers. He said it was straight forward and not a big deal. I went as far as acquiring the correct spanner wrench but haven't had the chance to take it apart..... My theory was its useless until it's taken apart and cleaned.

__________________
Go fast, see Elvis!
www.facebook.com/PaulKnippensMuscleMotors
  #2  
Old 05-20-2023, 08:22 AM
mgarblik mgarblik is offline
Ultimate Warrior
 
Join Date: Mar 2005
Posts: 6,992
Default

Quote:
Originally Posted by PAUL K View Post
I have one that needs cleaning. A buddy said that he takes them apart all the time to clean them for customers. He said it was straight forward and not a big deal. I went as far as acquiring the correct spanner wrench but haven't had the chance to take it apart..... My theory was its useless until it's taken apart and cleaned.
I just read through their PDF about cleaning. I am glad I have been using Moroso for decades. I just hate companies that assume racers are complete idiots and not capable of if unscrewing 2 end caps, pushing a piston out and changing 4 o-rings. Just ridiculous. Written by lawyers. Moroso sells a kit to rebuild theirs. To get the Canton one apart, you need a big spanner wrench and a rubber strap wrench to hold the cylinder so you don't distort it. Do not put it in any kind of vise. Or you can send it back to them I guess. Could probably take it apart, clean it out and put it back together with new o-rings in 1/2 hour. As prickly as they seem to be about opening it, getting the correct o-rings may be a bit of an issue. I would call them.

The Following 2 Users Say Thank You to mgarblik For This Useful Post:
  #3  
Old 05-24-2023, 06:30 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

Quote:
Originally Posted by PAUL K View Post
I have one that needs cleaning. A buddy said that he takes them apart all the time to clean them for customers. He said it was straight forward and not a big deal. I went as far as acquiring the correct spanner wrench but haven't had the chance to take it apart..... My theory was its useless until it's taken apart and cleaned.
I have taken apart at least 10 of the things. Still have 3 units (new on the shelf) and have never had an issue with cleaning the Accusump tanks
by taking them apart.

We used the Accusump Tanks on a test rig for a oil study in Research one time.

Tom V.

No worries Jim.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:11 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017